Dongguan Hansweld Co.,Ltd
Dongguan Hansweld Co.,Ltd
Add to Cart
Hot Air Reinforced Flexible Ducting Making Machine Pu Tpu Pvc Welding Hot Air Welding Machine
1. Original imported computer chip design , can be programmed in accordance wit user's requirements,microcomputer automatic control the whole machine ,simple operation , stable performance action, low failure rate .
2. It is 3 inch panasonic touch screen and can directly show all kinds of data.
3. Temperature is automatic tracking controlled by computer and its precision can reach +/-1.
4. The temperature is controlled by computer chip.twospeed motor.separate upper and lower roller motor , can adjust its speed .
5. Turn on the heating button , later turn it off and then delay the shut down , get into count down
6. No table, wide lower prop design ,suit to processing the large tents, rubber boats , air balloon, seamless sewing products, etc.
7. This model is suitable for processing the rubber boat's head, special to seaming the round corner . circular cone etc.
1. Vinyl (PVC) laminated fabric
2. Vinyl coated fabrics
3. Vinyl Films
4. Polyurethane film
5. Polypropylene coated fabric
6. Polyethylene (PE)
7. Thermoplastic rubber (TPR) film
8. Thermoplastic rubber fabrics
9. Nonwoven polyester
10. Various fusing tapes
11. Weldable webbings
| Voltage | 220 V 50/60 Hz | | |
| Speed | 1-24 m/min | | |
| Working Pressure | 3-6 KG/cm² | | |
| Upper Roller Pressure | 0.5-4.5 KG/cm² | | |
| Width of roller | 15-50MM | | |
| Upper roller lift | 15-25 mm | | |